We have recently made adjustments to this website. If you find anything that does not work, please let us know.


This shows you the differences between two versions of the page.

Link to this comparison view

midi:metronome [2018/05/12 22:37] (current)
Line 1: Line 1:
 +====== Metronome ======
 +[{{ :​midi:​buttonbar_playback_pro.png?​direct|The metronome button is located next to the //Play Button// on the button bar}}]
 +//This feature is available in Musink Pro only//
 +Musink Pro has a metronome that clicks during playback. To access the metronome control, either:
 +  * Click the //Metronome Button// (next to the Play Button), on the //Button Bar//, OR
 +  * **Click //​Playback//​** from the menu bar, then select **Show Metronome**
 +Clicking these same controls will hide the metronome if it is showing.
 +<WRAP round tip>
 +The metronome doesn'​t set the tempo of your piece. To set the tempo of your piece, see [[midi:​modifiers|]].
 +===== Volume/Mute =====
 +To turn the metronome off, set the volume to 0. To change the volume of the metronome:
 +  - Make sure the metronome control is showing (see above)
 +  - On the metronome control, **click the volume button**
 +  - Drag the slider up (louder) or down (quieter)
 +[{{ :​midi:​metronome-volume.png?​direct | Set the volume by dragging the volume slider on the metronome control }}]
 +==== Additional Information ====
 +The metronome plays a woodblock sound through MIDI channel 10; this works the same way that your music plays back. MIDI channel 10 is the same channel that is used for percussion in MIDI. Because of this, volume modifiers on any percussion stave may also affect the metronome. ​
 +Changing the metronome volume will not affect the volume of percussion staves. This is because the metronome volume sets the velocity of the metronome'​s notes, not the volume of channel 10; 
 +===== Division =====
 +The metronome can click at many frequencies,​ such as in 16ths or half-notes. By default, it clicks in quarter notes. To set the division value:
 +  - Make sure the metronome control is showing (see above)
 +  - On the metronome control, **select the division value** you wish from the drop down
 +[{{ :​midi:​metronome-division.png?​direct&​400 |Use the drop down on the metronome to change the division value. This can be changed during playback, if desired. }}]
 +<WRAP round info>
 +Changing the division value during playback may take up to two bars to take effect. Changing the division repeately during playback may cause small pauses in playback.